Steel Pipe Supplier in Jhansi — ERW, Seamless & GI Pipes

Jhansi sits on the Bundelkhand side of Uttar Pradesh, with buyer work clustered around the city, Babina, Bijouli, and the railway-junction workshops. RP Sales quotes those RFQs from the Kanpur stockyard and dispatches on a carrier plan written on the quotation. Typical lines are ERW to IS 1239 or IS 3589, seamless to ASTM A106 where the design names it, and GI to IS 1239 in the class the approved BOQ actually writes. Borewell casing to IS 4270 is quoted when the groundwater drawing calls for it. Mill Test Certificates, ISI copies, NABL reports, and IBR forms travel only when the order and the inspection plan name them.

On-the-ground in Jhansi — buyer pockets, not customer lists

Three Jhansi-area pockets show up on RFQs. Fabricators and scaffolding shops around Bijouli Industrial Area write structural ERW against the project class and wall. Buyers working near Babina cantonment and the defence-industrial belt usually attach a tender specification rather than a trade size list; quote those lots to that sheet, including any heat-mapping or third-party inspection the sheet names. Utility and process-utility piping around the BHEL township is quoted to the approved specification on that job. A separate stream is Jal Jeevan Mission contractors buying IS 1239 GI for last-mile household connections; copy the class and the ISI evidence from the approved BOQ instead of assuming Medium class on every panchayat line.

Material leaves Kanpur on the NH-27 / NH-34 corridor through Kalpi and Orai. This page does not publish a kilometre figure, a transit-hour band, or a next-morning rule for that run. Lalitpur, Mahoba, and Datia drops are quoted as their own PIN codes. Freight is quoted for the billed mass, the destination sequence, and whether the load is a dedicated truck or a consolidated drop. Do not apply a per-kilogram band from this page to a part-load or to a GI lot whose invoice weight is still unknown.

Products we quote for Jhansi-area RFQs

The Kanpur yard quotes the families below when the Jhansi-area BOQ names them. Availability is confirmed on the quotation, not as a standing stock list.

• MS ERW Pipes — IS 1239 / IS 3589 for structural fabrication, fencing, and building construction when the design names that family. View ERW pipe details.
• GI Pipes — IS 1239 hot-dip galvanized for water supply and municipal work in the class the approved BOQ writes. View GI pipe details.
• Seamless Steel Pipes — ASTM A106 / A53 when the approved design calls for seamless process or high-pressure lines. View seamless pipe details.
• Boiler Tubes — SA192, SA210 Gr A1/C when the drawing and the inspection plan name those grades. View boiler tube details.
• Precision & Hydraulic Tubes — quoted for equipment and hydraulic work against the drawing tolerance. View precision tube details.

ERW pipe RFQs from Jhansi defence and structural buyers

Bundelkhand ERW RFQs usually split three ways. Bijouli shops buy against project class and wall for frames, scaffolding, and building steel. Babina-area defence vendors attach a tender grade, wall, and test plan; the quotation should repeat those fields rather than substitute a trade class. Township utility piping is quoted to the approved specification on that job. None of those three is a reason to publish a standing Medium or Heavy recommendation. Copy the class from the approved design. Dispatch timing stays on the quotation; corridor names are routing context, not a published SLA.

Buyer work we quote around Jhansi

These are service-area work types, not a claim that RP Sales supplies the named establishments.

• Defence-linked fabrication — carbon-steel ERW and seamless quoted to the attached spec sheet, including any heat-mapping the sheet requires.
• Railway workshops and station work — ERW and GI for Jhansi Junction-area infrastructure when the work order names the standard and class.
• Building and government construction — structural ERW for residential, commercial, and public buildings against the project BOQ.
• Water and rural infrastructure — GI and ERW for last-mile and expressway-adjacent work when the approved design names the class and coating.

Dispatch from Kanpur toward Jhansi

Loads move from the Kanpur stockyard on the NH-27 corridor. The quotation states the carrier, the drop PIN code, and the committed date. This page does not publish a noon cutoff, a same-day load rule, or a next-morning arrival. Express or multi-drop sequencing is quoted when the RFQ asks for it.

How Jhansi-area buyers should read a Kanpur quote

Kanpur is the dispatch base. A landed cost is ex-warehouse Kanpur plus the freight and tax written on that quotation. This page does not compare Jhansi local yards or Delhi hauls, and it does not publish a freight-per-kilogram band.

• Prices are quoted per kg or per MT on the RFQ reply. Treat the quotation as the commercial document, not this page.
• Dedicated-truck versus consolidated drops change the freight line. Ask for the basis that matches the billed mass.
• See the MS & GI pipe price list for indicative Kanpur figures. Firm rates and tax sit on the quotation.

Documents named on the order

Defence-linked and government lots often need a longer file than a trade dispatch. List the file on the RFQ. Nothing below is a standing attachment on every Jhansi consignment.

• Original Mill Test Certificates stating chemical and mechanical properties, when the order asks for them.
• IBR paperwork classified by component: Form III-A for steam pipes, Form III-B for tubes, Form III-C only for boiler mountings and fittings, and only when the approved inspection plan / authority names that form.
• Tax-compliant e-way bills and GST invoices, with tax as stated on the current quotation.

How to place an order

1. Send the BOQ — pipe type, size, grade, quantity, inspection documents, and the Jhansi-area delivery PIN code.
2. Ajay or Ayush replies with a quotation once the RFQ has enough fields to price. Reply timing is confirmed when we acknowledge the RFQ.
3. Approve the quotation and issue a Purchase Order that repeats the document set and the committed date.
4. We dispatch from the Kanpur stockyard on the carrier plan written on that acknowledgement.

Trust signals

RFQ checklist for Jhansi buyers

A complete RFQ is what lets us write a firm ex-warehouse Kanpur line. Most Jhansi delays come from a missing class or a missing test list, not from the yard. Send the seven lines below with your RFQ.

• Size in NB plus OD in mm. Tenders list 50 NB while site teams measure 60.3 mm OD. State both and the mismatch risk disappears.
• Class or wall thickness. Light, Medium or Heavy under IS 1239, or exact WT in mm for seamless. Copy the class from the approved JJM or project BOQ. Do not assume Medium on every last-mile line.
• Grade and standard. IS 1239 / IS 3589 for ERW, ASTM A106 Gr B for seamless, SA192 / SA210 for boiler tubes — each only where the approved design names that family. Defence-linked orders must attach the buyer spec sheet.
• Length and end finish. State the mill length or the cutting schedule. Cut-to-length bundles reduce scrap on railing and purlin jobs when the RFQ includes the schedule.
• Coating. Bare black, red-oxide primer or hot-dip GI to IS 1239. State zinc expectations wherever the tender scores them. Coating choice follows the approved design and corrosion data, not a service label.
• Test paperwork. List MTC, ISI copies, NABL heat reports, stencil photos, and TPI on the RFQ. For IBR-covered lots, classify each line as steam pipe (Form III-A), tube (Form III-B), or mounting/fitting (Form III-C) and defer the issued form to the approved inspection plan.
• Delivery basis. Ex-warehouse Kanpur plus freight to the Jhansi PIN code, with tax as stated on the current price list and quotation. Confirm dedicated truck or consolidation. Track Kanpur steel market movement with the quote.

Receiving a Jhansi-bound lot

Check the lot against the PO before the truck is released. Match heat numbers on the stencil to the MTC. On GI, reconcile the weighment slip to the invoice weight, not to a theoretical black-steel mass. On defence-linked lots, keep the stencil photographs with the file if the spec asked for them. Reject class substitution at the gate: a Light bundle cannot close a Medium line item. Cap bare ends if the site will stage steel through Bundelkhand rains.

Payment terms, freight credits, and account cycles are not published here. They sit on the quotation. If the PO and the acknowledgement disagree on documents or date, stop the load and reopen the RFQ rather than arguing at Babina or Bijouli after dusk.

Worked example: tonnage check on a JJM-style order for Jhansi

Take a last-mile water order of 200 lengths of 50 NB GI written as Medium class, each 6 m long, only when that class is what the approved BOQ actually names. The site formula W = (OD minus t) x t x 0.02466 kg/m uses the black-steel substrate dimensions. Using OD 60.3 mm and wall 3.6 mm — the pair stored in the site pipe-weight table for this worked example, not a displayed chart mass — gives W = (60.3 minus 3.6) x 3.6 x 0.02466 = 5.03 kg/m and 30.2 kg per 6 m length. Multiplying 200 by 30.2 gives 6,040 kg, or 6.04 MT, as a theoretical black-steel substrate mass, not the coated GI bundle mass. The site note says galvanizing typically adds roughly 3 to 6 percent mass; billing should use the coated-bundle or invoice weight from the supplier without fabricating one exact coated figure.

Ask for a current freight quote on the actual coated-bundle billing basis, destination PIN code, and delivery sequence. Do not apply a published per-kilogram band from this page. Reconcile the theoretical substrate estimate, the supplier weight, and the quoted freight basis before raising the PO.

Procurement mistakes Jhansi buyers avoid

Failed Jhansi deliveries usually trace to four repeating errors. Each is cheap to prevent at RFQ stage and costly after the truck is loaded.

• Class substitution. Swapping Medium for Light to save money fails thickness checks at panchayat handover when the BOQ named Medium. Match the tender class exactly.
• Heat-linkage gaps. Spec-sheet vendors reject MTCs that do not map to the heat numbers stencilled on the pipe. Ask for stencil photos when the spec requires them, and confirm they are on the PO.
• Missing ISI copies. Panchayat handover files often need ISI marking certificates for GI lots. Request the copy on the RFQ if the handover protocol names it.
• Open-yard monsoon storage. Bare ERW ends rust fast in Bundelkhand rains. Order capped ends or the coating the design names for staged sites.

Most-Ordered Sizes

FAQ