Steel Pipe Supplier in Bareilly — ERW, Seamless & GI Pipes

Bareilly is the Rohilkhand city whose RFQs most often mix furniture-tube frames with ordinary water-and-gas pipe. RP Sales quotes those lots from the Kanpur stockyard and dispatches on a carrier plan written on the quotation. Round furniture tube is ordered to the approved drawing and the furniture-tube standard that drawing names. Square and rectangular hollow sections use the IS 4923 family on this site. IS 1239 class language stays on water, gas, air, steam, or plumbing duties inside the scope of that standard. Seamless and GI lines follow their own approved design. Documents, tax, freight, and the committed date are quote-specific.

On-the-ground in Bareilly — where RFQs actually land

Most Bareilly furniture RFQs name Parsakhera Industrial Area on the Pilibhit-Bareilly Road. Wardrobe-and-rack OEMs, school-desk fabricators, and hospital-bed makers write round ERW furniture tubes to the approved drawing, plus square and rectangular hollow sections in the IS 4923 family for racking and frame welding. Wall thickness remains a drawing field. A separate stream of light-gauge ERW and pre-galvanised tubing goes to cold-storage and agro-processing units along the Pilibhit-Bareilly belt, where the equipment or structural specification controls. Izzat Nagar contractors take IS 1239 GI for Civil Lines plumbing in the class named by the approved design, with ISI marking checked against the order when the handover file asks for it.

Material moves from Kanpur on NH-27 via Sitapur and Shahjahanpur. This page does not publish a kilometre figure, a 6-8 hour drive, or a next-day promise. Smaller workshops often ask for one or two bundles rather than a dedicated truck; ask the quotation whether a consolidated Bareilly drop is available for that load. Freight, any sharing of a truck, payment terms, and credit days are written on the quote. Do not treat a local Bareilly trader markup as a published comparison.

Products we quote for Bareilly-area RFQs

The Kanpur warehouse quotes the families Bareilly manufacturing, construction, and agricultural RFQs actually name. Availability is confirmed on the quotation.

• MS ERW Products — round furniture tubes to the applicable furniture-tube specification, IS 4923 hollow sections for square and rectangular frames, and IS 1239 / IS 3589 pipe where the utility or structural design names it. View ERW pipe details.
• GI Pipes — IS 1239 hot-dip galvanized for water supply, plumbing, and irrigation in the class the approved design writes. View GI pipe details.
• Seamless Steel Pipes — ASTM A106 / A53 when the approved design calls for seamless process or high-pressure lines. View seamless pipe details.
• Precision Tubes — tight-tolerance tubes for furniture, automotive ancillaries, and hydraulic fittings against the drawing. View precision tube details.
• Drill & Borewell Pipes — for agricultural borewells and groundwater extraction when the well drawing names the standard. View borewell pipe details.

ERW pipe supply for the Bareilly furniture cluster

The Parsakhera furniture cluster — along the Pilibhit-Bareilly Road and into the adjacent UPSIDC Parsakhera Industrial Area — builds wardrobes, school desks, hospital beds, racking systems, and institutional seating from round furniture tube and square or rectangular hollow sections. Round furniture-tube orders should cite the approved drawing and applicable furniture standard, such as IS 7138 where required; square and rectangular sections use the IS 4923 family on this site. Neither should be converted into IS 1239 Light or Medium simply because both are ERW products. State the exact section, wall, grade, length, finish, and acceptance evidence in the RFQ. Finish is the OEM-named coating, not a yard default. Sub-truckload orders can be asked as a consolidation on the quotation; they are not a standing weekly credit.

Seamless steel pipe RFQs from Bareilly

Seamless demand in Bareilly is smaller than furniture ERW and is still quote-driven. UPSIDC Parsakhera tenants — cold-storage rooms, agro-processing dryers, and dairy or food-processing plants on the Pilibhit-Bareilly belt — should name the grade on the approved design. ASTM A106 Gr B and ASTM A335 P11 / P22 are quoted when that design names them. Do not infer alloy seamless from a service label or from a temperature figure on this page. We ship against a written grade and heat-number requirement. MTC and any IBR form travel only when the order and the inspection plan name them. Classify IBR items as steam pipe (Form III-A), tube (Form III-B), or mounting/fitting (Form III-C). Lead time and freight are on the quotation; this page does not publish same-day dispatch, a 7-14 day mill pad, or a per-kilogram freight band.

Buyer work we quote around Bareilly

Bareilly RFQs split across manufacturing, construction, and agriculture. Each line still needs its own standard and acceptance evidence.

• Furniture manufacturing — MS ERW round, square, and rectangular sections for metal furniture, office chairs, hospital beds, and institutional seating against the drawing.
• Construction and real estate — structural ERW for building frameworks, handrailing, and urban work when the project BOQ names the class.
• Agriculture and irrigation — GI tubewell pipes and borewell casings for Rohilkhand groundwater work when the well drawing names the standard.
• Food processing — stainless, GI, or carbon lines for dairy, beverage, and cold-storage rooms only in the material the approved process design names.

Dispatch from Kanpur toward Bareilly

Loads move from the Kanpur stockyard on the NH-27 corridor. The quotation states the carrier, the drop PIN code, and the committed date. This page does not publish a noon cutoff or a next-morning arrival. Dedicated-truck versus consolidated drops are quoted per load.

How Bareilly furniture buyers should read a Kanpur quote

Furniture OEMs buy in repeating sections. That does not create a published volume rate, a Delhi or Ludhiana comparison, or a mill-direct price on this page. The quotation is the commercial document.

• Prices are quoted per kg or per MT on the RFQ reply.
• Repeat-order pricing, if offered, is written on that quotation.
• See the MS & GI pipe price list for indicative Kanpur figures. Firm rates and tax sit on the quotation.

Documents named on the order

A furniture export lot and a government plumbing tender do not share one file. List the file on the RFQ.

• Original Mill Test Certificates stating chemical and mechanical properties, when the order asks for them.
• Delivery challans with weighment-bridge slips for quantity verification.
• Tax-compliant e-way bills and GST invoices, with tax as stated on the current quotation.
• For IBR-covered steam or tube lots, classify the component and defer the form to the approved inspection plan: Form III-A for steam pipes, Form III-B for tubes, Form III-C only for boiler mountings and fittings.

How to place an order

1. Send the requirement — profile or pipe type, size, wall, finish, grade, quantity, documents, and the Bareilly delivery location.
2. Ajay or Ayush replies with a quotation once the RFQ has enough fields to price. Reply timing is confirmed when we acknowledge the RFQ.
3. Approve the quotation and issue a Purchase Order that repeats the finish, documents, and committed date.
4. We dispatch from the Kanpur stockyard on the carrier plan written on that acknowledgement.

Trust signals

RFQ checklist for Bareilly buyers

Parsakhera OEMs lose the most time to a vague finish and a missing section size. Send the seven lines below with your RFQ.

• Profile and section size. Round OD or square / rectangular section copied from the furniture drawing. State the exact section; do not write a water-and-gas NB in place of a frame OD.
• Wall thickness in mm. Copy the wall from the furniture drawing or approved section schedule. Do not translate a light-gauge furniture requirement into an IS 1239 Light, Medium, or Heavy water-and-gas class.
• Grade and standard. Use the approved furniture-tube specification for round tubes, such as IS 7138 where required, and IS 4923 for the square or rectangular hollow-section family. Reserve IS 1239 classes for the water, gas, air, steam, or plumbing duties within the scope of that standard. Other utility lines follow their own approved design.
• Finish. Black, pre-galvanized or powder-coat-ready surface. Institutional tenders often score the finish, so name it in the RFQ.
• Length and cutting. State the mill length or the cutting schedule. Cut-to-length bundles suit high-volume desk and rack lines when the RFQ includes the schedule.
• Test paperwork. List MTC, heat-linked traceability, and ISI copies on the RFQ if the export file or the BDA-site plumbing handover needs them. They ship when the order names them.
• Delivery basis. Ex-warehouse Kanpur plus freight to the Bareilly PIN code, with tax as stated on the current price list and quotation. Ask whether a single bundle can join a consolidated drop. Track Kanpur steel market movement with the quote.

Receiving a Bareilly furniture or plumbing lot

Check section, wall, and finish against the drawing before the bundle is opened onto the shop floor. A 32 mm OD furniture tube is not 32 NB. Oily black pipe that arrives on a powder-coat line will stop the booth; that is a finish miss, not a freight miss. For Civil Lines plumbing, keep ISI copies with the site file if the inspector checklist names them. Reconcile the weighment slip to the invoice weight.

Payment terms are not published here. If the PO and the acknowledgement disagree on finish or documents, stop the load in Kanpur rather than arguing in Parsakhera after welding has started.

Worked example: tonnage check on a workshop order for Bareilly

Take a workshop-shed plumbing order of 80 lengths of 50 NB ERW written as Medium class, each 6 m long, only when that class is what the approved design names. The site weight formula is W = (OD minus t) x t x 0.02466 kg/m, with OD and wall in mm. Using OD 60.3 mm and wall 3.6 mm — the pair stored in the site pipe-weight table for this worked example, not a displayed chart mass — W = (60.3 minus 3.6) x 3.6 x 0.02466 = 5.03 kg/m. One 6 m length weighs 30.2 kg, and the full order is 80 x 30.2 = 2,416 kg, about 2.42 MT.

That mass is a theoretical black-steel figure. Ask for a current freight quote on the billed mass, PIN code, and whether the lot moves as a dedicated truck or a consolidated drop. Do not apply a published per-kilogram band from this page. Confirm the tonnage on the PO and reconcile the weighment slip on arrival.

Procurement mistakes Bareilly buyers avoid

Problem Bareilly consignments usually trace to four repeating errors. Each is easy to catch at RFQ stage and painful after welding starts.

• Mixing product families. An IS 1239 water-and-gas class is not a substitute for the furniture drawing. Match the round-tube or hollow-section standard, exact wall, grade, and finish to the approved frame design.
• Wrong finish for coating lines. Oily black pipe gums up powder-coat booths. Specify powder-coat-ready surface where the line demands it.
• Skipping ISI copies. BDA-site inspectors may check ISI marking on Civil Lines plumbing lots. Ask for the certificate on the RFQ if the handover file names it.
• Ordering OD when the tender says NB. A 32 mm OD tube is not 32 NB. State both figures and the cutting schedule together.

Most-Ordered Sizes

FAQ